[26-55] Dhcp-Options; [26-56] Dhcp-Mac-Address; [26-57] Dhcp-Gi-Address - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - BROADBAND ACCESS CONFIGURATION GUIDE 2010-10-12 Configuration Manual

JunosE 11.3.x Broadband Access Configuration Guide
radius include dhcp-options
radius include dhcp-mac-address
radius include dhcp-gi-address
224
Example
host1(config)#radius include profile-service-description acct-stop enable
Use the no version to restore the default, disable.

[26-55] DHCP-Options

Use the following command to manage the DHCP-Options RADIUS attribute.
radius include dhcp-options
Use to include the DHCP-Options attribute in Access-Request, Acct-Start, and
Acct-Stop messages.
You can control inclusion of the attribute by enabling or disabling this command.
See radius include
Example
host1(config)#radius include dhcp-options acct-stop enable
Use the no version to restore the default, disable.

[26-56] DHCP-MAC-Address

Use the following command to manage the DHCP-MAC-Address RADIUS attribute.
radius include dhcp-mac-address
Use to include the DHCP-MAC-Address attribute in Access-Request, Acct-Start, and
Acct-Stop messages.
You can control inclusion of the attribute by enabling or disabling this command.
See radius include
Example
host1(config)#radius include dhcp-mac-address acct-stop enable
Use the no version to restore the default, disable.

[26-57] DHCP-GI-Address

Use the following command to manage the DHCP-GI-Address RADIUS attribute.
radius include dhcp-gi-address
Use to include the DHCP-GI-Address attribute in Access-Request, Acct-Start, and
Acct-Stop messages.
You can control inclusion of the attribute by enabling or disabling this command.
Copyright © 2010, Juniper Networks, Inc.