Monitoring Tacacs+ Information; Table 67: Show Tacacs Output Fields - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - BROADBAND ACCESS CONFIGURATION GUIDE 2010-10-12 Configuration Manual

Monitoring TACACS+ Information

Purpose
Action
Meaning
Copyright © 2010, Juniper Networks, Inc.
Display TACACS+ information.
To display TACACS+ information.
host1#show tacacs
Key = hippo
Timeout = <NOTSET>, built-in timeout of 5 will be used
Source-address = <NOTSET>
TACACS+ Configuration, (*) denotes inherited
--------------------------------------------
Tcp
IP Address Port Timeout
---------- ---- -------
10.5.0.174 3049 5 (*)
10.5.1.199 1049 5 (*)
To display overall statistics:
host1#show tacacs statistics
To display statistics since they were baselined; deltas are not calculated for the pending
statistics:
host1#show tacacs delta
Table 67 on page 331 lists the show tacacs command output fields.

Table 67: show tacacs Output Fields

Field Name
Key
Timeout
Source-address
TACACSPLUS Configuration
IP Address
TCP Port
Timeout
Primary
Key
Search Order
Search
Primary Key Order
------- --------- ------
y hippo (*) 1
n hippo (*) 2
Field Description
Authentication and encryption key
TACACS+ host response timeout in seconds
Alternative source IP address configured
Table contains statistics for each host
IP address of the host
TCP port of the host for each IP address
Timeout interval in seconds for each IP address
This IP address's primary host; options: y = yes, n =
no
Authentication and encryption key for this IP address
The order in which requests are sent to hosts until a
response is received
Chapter 10: Monitoring TACACS+
331