Table 29: Show Radius Statistics Output Fields - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - BROADBAND ACCESS CONFIGURATION GUIDE 2010-10-12 Configuration Manual

JunosE 11.3.x Broadband Access Configuration Guide
Meaning
146
To display RADIUS route-download statistics:
host1#show radius route-download statistics
RADIUS Route-Download Statistics
--------------------------------
Statistic 192.168.30.16
------------------- -------------
UDP Port 1812
Round Trip Time 0
Access Requests 1613
Rollover Requests 0
Retransmissions 6
Access Accepts 1612
Access Rejects 1
Access Challenges 0
Malformed Responses 0
Bad Authenticators 0
Requests Pending 0
Request Timeouts 6
Unknown Responses 0
Packets Dropped 5
Table 29 on page 146 lists the show radius statistics command output fields.
NOTE: All descriptions apply to the primary, secondary, and tertiary RADIUS
authentication and accounting servers.

Table 29: show radius statistics Output Fields

Field Name
UDP Port
Round Trip Time
Access Requests
Rollover Requests
Retransmissions
Access Accepts
Access Rejects
Access Challenges
Malformed Responses
Field Description
Number of the UDP port of a RADIUS server
Hundreds of seconds from request to response
Number of access requests sent to server
Number of requests coming into server as a result of
the previous server timing out
Number of retransmissions
Number of Access-Accepts received from the server
Number of Access-Rejects received from the server
Number of access challenges received from the server
Number of responses with attributes having an invalid
length or unexpected attributes (such as two
attributes when the response is required to have at
most one)
Copyright © 2010, Juniper Networks, Inc.