Server; Table 131: Show Ip Dhcp-Local Limits Output Fields - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - BROADBAND ACCESS CONFIGURATION GUIDE 2010-10-12 Configuration Manual

JunosE 11.3.x Broadband Access Configuration Guide
Related
Documentation
Monitoring Static IP Address and MAC Address Pairs Supplied by DHCP Local Server
Purpose
Action
Meaning
572

Table 131: show ip dhcp-local limits Output Fields

Field Name
ATM Limit
VLAN Limit
POS Limit
Ethernet Limit
Limit
Count
Denied
Total Denied
show ip dhcp-local limits
Display the static IP address/MAC address pairs that the DHCP local server supplies in
standalone mode.
To display information about static IP address/MAC address pairs:
host1#show ip dhcp-local reserved
Pool Address
---------- ------------
cablemodem 10.44.44.100
cablemodem 10.44.44.101
Table 132 on page 573 lists the show ip dhcp-local reserved command output fields.
Field Description
Number of leases available for each VPI/VCI
Number of leases available for each VLAN
Number of leases available for each POS access
interface
Number of leases available for each Ethernet
subnet
Number of leases available to the specified
interface or subinterface; indicates the
configured value for the interface type unless a
specific lease value is configured for the
particular interface
Number of active leases on the interface
Number of lease requests denied during the
current denial period; this number is reset to zero
(and the denial period restarted) when the
number of active leases no longer exceeds the
configured limit
Total number of lease requests denied on the
interface since the interface became active
Dhcp Reserved Addresses
-----------------------
Hardware
-----------------------------------------------
12-34-12-34-12-34-00-00-00-00-00-00-00-00-00-00
22-33-22-33-22-33-00-00-00-00-00-00-00-00-00-00
Copyright © 2010, Juniper Networks, Inc.