Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - BROADBAND ACCESS CONFIGURATION GUIDE 2010-10-12 Configuration Manual page 527

Copyright © 2010, Juniper Networks, Inc.
Enable the DHCP local server.
4.
host1(config)#service dhcp-local
Specify the IP addresses that are in use, so that the DHCP local server cannot assign
5.
these addresses.
host1(config)#ip dhcp-local excluded-address 10.10.1.1
host1(config)#ip dhcp-local excluded-address 10.10.1.2
Configure the DHCP local server to provide IP addresses to subscribers of ISP Boston.
6.
host1(config)ip dhcp-local pool ispBoston
host1(config-dhcp-local)#network 10.10.2.0 255.255.255.0
host1(config-dhcp-local)#domain-name ispBoston
host1(config-dhcp-local)#default-router 10.10.2.1
host1(config-dhcp-local)#lease 0 0 10
host1(config-dhcp-local)#ip dhcp-local limit atm 5
Configure the SRC client.
7.
host1(config)#sscc enable
host1(config)#sscc retryTimer 200
host1(config)#sscc primary address 10.10.1.2 port 3288
Chapter 19: Configuring DHCP Local Server
489