Modifying Qos Configurations Using Other Sources; Table 143: Modifying Qos Configurations With Other Sources - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - BROADBAND ACCESS CONFIGURATION GUIDE 2010-10-12 Configuration Manual

JunosE 11.3.x Broadband Access Configuration Guide
648
Table 142: Configuration Within a Single Service Manager Event
(continued)
Profile
Service Manager

Modifying QoS Configurations Using Other Sources

You can modify QoS configurations with Service Manager by using other QoS sources.
For example, you can modify a parameter instance that was created with Service Manager
by using the CLI. Similarly, you can use SNMP to detach a QoS profile attached by Service
Manager.
Table 143 on page 648 lists the sources that you can use to modify QoS profile attachments
and parameter instances.

Table 143: Modifying QoS Configurations with Other Sources

QoS Profile
Attachment
Service
Manager
RADIUS
SNMP
SRC software
CLI
The following sections describe the precedence of each source when modifying
configurations.
Service Manager
QoS profile attachments and parameter instances created through Service Manager
have precedence over all other sources. For example, Service Manager can overwrite a
QoS profile attachment modified through RADIUS, SNMP, the SRC software, or the CLI.
Conversely, Service Manager configurations can be overwritten through SNMP, the SRC
software, and the CLI, but not by RADIUS.
Service Manager counts references of parameter instances. You can modify parameter
instances created by Service Manager using other sources without affecting the reference
counts. For more information, see "QoS Statistics" on page 650.
RADIUS
QoS profile attachments and parameter instances configured through RADIUS can
overwrite QoS profile attachments and parameter instances configured through the
SNMP, the SRC software, and the CLI, but not those created by Service Manager.
RADIUS Service Manager
QoS Parameter
Instances
–
–
Copyright © 2010, Juniper Networks, Inc.