Monitoring The Maximum Number Of Available Leases - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - BROADBAND ACCESS CONFIGURATION GUIDE 2010-10-12 Configuration Manual

Related
Documentation

Monitoring the Maximum Number of Available Leases

Purpose
Action
Meaning
Copyright © 2010, Juniper Networks, Inc.
Table 130: show ip dhcp-local duplicate-clients Output Fields (continued)
Field Name
Count
Time
show ip dhcp-local duplicate-clients
Display the maximum number of leases available for each VPI/VCI, VLAN, Ethernet
subnetwork, or POS access interface type, or for a specific interface or subinterface.
To display the maximum number of leases available for each interface type:
host1(config)#show ip dhcp-local limits
*****************************************
DHCP Local Server Address Limits
ATM Limit - 48000
VLAN Limit - 48000
POS Limit - 1000
Ethernet Limit - 48000
To display information about the maximum number of leases for a specific interface:
host1(config)#show ip dhcp-local limits interface atm 3/1
Dhcp Local Interface Limits
---------------------------
Interface Limit Count
--------- ----- -----
atm 3/1 300 127
To display information about the maximum number of leases on all interfaces:
host1(config)#show ip dhcp-local limits interface
Dhcp Local Interface Limits
---------------------------
Interface Limit
--------- -----
fastEthernet0/0 200
atm 3/1 300
atm 4/2 5000
atm 5/1 5000
pos 2/1 1000
Table 131 on page 572 lists the show ip dhcp-local limits command output fields.
Chapter 22: Monitoring and Troubleshooting DHCP
Field Description
Number of times the duplicate MAC address has been detected
Date and time the first duplication was detected
Total
Denied Denied
------ ------
5 29
Total
Count Denied Denied
----- ------ ------
0 0 0
127 5 29
0 0 0
15 2 5
0 0 0
571