Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - BROADBAND ACCESS CONFIGURATION GUIDE 2010-10-12 Configuration Manual page 305

Table 50: Juniper Networks (Vendor ID 4874) VSA Formats (continued)
Attribute
Number Attribute Name
[26-71] IGMP-Access-Name
[26-72] IGMP-Access-Src-Name
[26-73] IGMP-OIF-Map-Name
[26-74] MLD-Access-Name
[26-75] MLD-Access-Src-Name
[26-76] MLD-OIF-Map-Name
[26-77] MLD-Version
[26-78] IGMP-Version
[26-79] IP-Mcast-Adm-Bw-Limit
[26-80] IPv6-Mcast-Adm-Bw-
Limit
[26-81] L2c-Information
Copyright © 2010, Juniper Networks, Inc.
Description
Access List to use for the group (G) filter
Access List to use for the source-group
(S,G) filter
Multicast OIF (outgoing interface) mapping
Access List to use for the group (G) filter
Access List to use for the source-group
(S,G) filter
Multicast OIF (outgoing interface) mapping
MLD Protocol Version (MLD Version 1 = 1;
MLD Version 2 = 2)
IGMP Protocol Version (IGMP Version 1=1;
IGMP Version 2 = 2; IGMP Version 3 = 3)
The maximum multicast bandwidth that
will be admitted on an IP interface, in Kbps
The maximum multicast bandwidth that
will be admitted on an IPv6 interface, in
Kbps
Series of type length value (tlv) fields
(binary) representing the access loop
parameters as defined in GSMP extensions
for layer2 control (L2C) Topology Discovery
and Line
Configuration—draft-wadhwa-gsmp-
l2control-configuration-00.txt (July 2006
expiration)
Chapter 6: RADIUS Attribute Descriptions
Subtype
Length Length Value
len sublen string:32-octet
len sublen string:32-octet
len sublen string:32-octet
len sublen string:32-octet
len sublen string:32-octet
len sublen string:32-octet
12 6 integer:1-octet
12 6 integer:1-octet
12 6 integer:4-octet
12 6 integer:4-octet
len sublen string: format is a
series of type length
value (tlv) fields
(binary) representing
the access loop
parameters
267