Monitoring And Troubleshooting Remote Access - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - BROADBAND ACCESS CONFIGURATION GUIDE 2010-10-12 Configuration Manual

CHAPTER 2
Monitoring and Troubleshooting Remote
Access
Copyright © 2010, Juniper Networks, Inc.
Use the commands in this chapter to set baselines for and to monitor remote access.
Setting Baselines for Remote Access on page 112
How to Monitor PPP Interfaces on page 114
Monitoring AAA Accounting Configuration on page 114
Monitoring AAA Accounting Default on page 115
Monitoring Accounting Interval on page 115
Monitoring Specific Virtual Router Groups on page 116
Monitoring the Default AAA Authentication Method List on page 116
Monitoring Domain and Realm Name Delimiters on page 117
Monitoring Mapping Between User Domains and Virtual Routers on page 117
Monitoring Tunnel Subscriber Authentication on page 119
Monitoring Routing Table Address Lookup on page 120
Monitoring the AAA Model on page 120
Monitoring IP Addresses of Primary and Secondary DNS and WINS Name
Servers on page 120
Monitoring AAA Profile Configuration on page 120
Monitoring Statistics about the RADIUS Route-Download Server on page 121
Monitoring Routes Downloaded by the RADIUS Route-Download Server on page 123
Monitoring Chassis-Wide Routes Downloaded by RADIUS Route-Download
Servers on page 124
Monitoring Authentication, Authorization, and Accounting Statistics on page 126
Monitoring the Number of Active Subscribers Per Port on page 128
Monitoring the Maximum Number of Active Subscribers Per Virtual Router on page 128
Monitoring Session Timeouts on page 128
Monitoring Interim Accounting for Users on the Virtual Router on page 129
Monitoring Virtual Router Groups Configured for AAA Broadcast Accounting on page 129
Monitoring Configuration Information for AAA Local Authentication on page 130
111