Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - BROADBAND ACCESS CONFIGURATION GUIDE 2010-10-12 Configuration Manual page 302

JunosE 11.3.x Broadband Access Configuration Guide
Table 50: Juniper Networks (Vendor ID 4874) VSA Formats (continued)
Attribute
Number Attribute Name
[26-22] Sa-Validate
[26-23] Igmp-Enable
[26-24] Pppoe-Description
[26-25] Redirect-Vrouter-Name
[26-26] QoS-Profile-Name
[26-28] PppoE-Url
[26-30] Tunnel-Nas-Port-Method
[26-31] Service-Bundle
[26-33] Tunnel-Max-Sessions
[26-34] Framed-Ip-Route-Tag
[26-35] Tunnel-Dialout-Number
[26-36] PPP-Username
[26-37] PPP-Password
[26-38] PPP-Protocol
264
Description
Enable or disable source address
validation on a user's interface
4-octet integer
Enable or disable IGMP on a user's
interface
Allows the end user to register for the
reception of multicast services
4-octet integer
The string pppoe <mac addr> sent to the
RADIUS server supplied by PPPoE
Virtual router name indicating the VR
context in which to authenticate the user
Behavior is similar to that of a remote
domain-map lookup.
Name of the QoS profile to attach to the
user's interface
PPPoE URL that is passed to PPPoE
subscribers
Conveys nasPort and nasPort type in tunnel
Specifies the SRC service bundle
Maximum number of sessions allowed in a
tunnel
Route tag to apply to returned
framed-ip-address
Dial number in L2TP dial-out
Username used in PPP L2TP dial-out
sessions at the LNS for L2TP dial-out
Password used in PPP L2TP dial-out
sessions at the LNS for L2TP dial-out
PPP authentication protocol used for L2TP
dial-out sessions at the LNS
Subtype
Length Length Value
len sublen integer: 0 = disable,
1 = enable
len sublen integer: 0 = disable,
1 = enable
len sublen string: pppoe<mac
addr>
len sublen authentication-
redirection
len sublen string:
qos-profile-name
len sublen string:URL
12 6 4-octet integer:
0 = none,
1 = Cisco CLID
len sublen string
12 6 integer: 4-octet
12 6 integer: 4-octet
len sublen string:dial-out-number
len sublen string: ppp-username
len sublen string: ppp-password
12 6 integer: 0 = none;
1 = PAP; 2 = CHAP;
3 = PAP-CHAP;
4 = CHAP-PAP
Copyright © 2010, Juniper Networks, Inc.