Monitoring Service Definitions - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - BROADBAND ACCESS CONFIGURATION GUIDE 2010-10-12 Configuration Manual

Related
Documentation

Monitoring Service Definitions

Purpose
Action
Copyright © 2010, Juniper Networks, Inc.
Table 160: show ipv6 interface Output Fields (continued)
Field Name
classifier-group entry
Committed
Conformed
Exceeded
queue, traffic class, bound to ipv6
Queue length
Dropped committed packets,
bytes
Dropped conformed packets,
bytes
Dropped exceeded packets, bytes
show ip interface
show ipv6 interface
Display information about the service definitions configured on your router.
To display information for the particular service definition, specify the name of a service
definition macro file, including the .mac extension:
host1#show service-management service-definition tiered.mac
tiered.mac - WED DEC 14 14:41:20 2005
Installed: True
Service: tiered(inputbw, outputbw)
Reference Count: 0
To display summary information for all service definitions:
host1#show service-management service-definition brief
Service Definitions
-------------------
Filename Service
Chapter 28: Monitoring Service Manager
Field Description
Entry index
Number of packets and bytes conforming to the
committed access rate
Number of packets and bytes that exceed the
committed access rate but conform to the peak
access rate
Number of packets and bytes exceeding the peak
access rate
Queue and traffic class bound to the specified IPv6
interface
Number of bytes in queue
Total number of committed packets and bytes
dropped by this interface
Total number of conformed packets and bytes
dropped by this interface
Total number of exceeded packets and bytes dropped
by this interface
Reference
Installed Count
713