Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - BROADBAND ACCESS CONFIGURATION GUIDE 2010-10-12 Configuration Manual page 115

Software for e series broadband services routers broadband access configuration guide
Hide thumbs Also See for JUNOSE SOFTWARE FOR E SERIES 11.3.X - BROADBAND ACCESS CONFIGURATION GUIDE 2010-10-12:
Table of Contents

Advertisement

aaa profile
Copyright © 2010, Juniper Networks, Inc.
host1(config-aaa-profile)#pre-authenticate
host1(config-aaa-profile)#exit
Define a RADIUS preauthentication server.
2.
host1(config)#radius pre-authentication server 10.10.10.1
host1(config-radius)#key abc123
host1(config-radius)#exit
Associate the AAA profile with the designated PPP interface.
3.
host1(config)#interface atm 4/3.101
host1(config-subif)#ppp aaa-profile preAuthLlid
(Optional) Verify that preauthentication support is configured for the AAA profile.
4.
host1(config-subif)#run show aaa profile name PreAuthLlid
preAuthLlid:
atm nas-port-type: ADLSL-CAP
ethernet nas-port-type: Cable
profile-service-description: xyzService
pre-authenticate
allow xyz.com
deny default
translate xyz1.com abc.com
For information, see "Setting Baselines for Remote Access" on page 112.
(Optional) Verify configuration of the RADIUS preauthentication server.
5.
host1(config-subif)#run show radius pre-authentication servers
RADIUS Pre-Authentication Configuration
---------------------------------------
Udp
IP Address
Port
-------------
----
10.10.10.1
1812
You can also display configuration information for preauthentication servers by using
the show radius servers command. For information, see "Setting Baselines for Remote
Access" on page 112.
(Optional) Display statistics for the RADIUS preauthentication server.
6.
To display preauthentication statistics, use the show radius pre-authentication
statistics command. For information, see "Setting Baselines for Remote Access" on
page 112.
To display a count of preauthentication requests and responses, use the show aaa
statistics command. For information, see "Setting Baselines for Remote Access" on
page 112.
Use to configure a new AAA profile.
Example
host1(config)#aaa profile boston123
Chapter 1: Configuring Remote Access
Retry
Maximum
Count
Timeout
Sessions
-----
-------
--------
3
3
255
Dead
Time
Secret
----
------
0
radius
77

Advertisement

Table of Contents
loading

This manual is also suitable for:

Junose 11.3

Table of Contents