Monitoring The Configuration Of The Radius Dynamic-Request Server; Table 60: Show Radius Dynamic-Request Servers Output Fields - Juniper JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010 Configuration Manual

JUNOSe 11.1.x Broadband Access Configuration Guide
Table 59: show radius dynamic-request statistics Output Fields (continued)
Related Topics

Monitoring the Configuration of the RADIUS Dynamic-Request Server

Display the configuration of the RADIUS dynamic-request server.
Purpose
To display the configuration of the RADIUS dynamic-request server:
Action
host1#show radius dynamic-request servers
-------------
192.168.2.3
10.10.120.104
Table 60 on page 312 lists the show radius dynamic-request servers command
Meaning
output fields.

Table 60: show radius dynamic-request servers Output Fields

312
Monitoring the Configuration of the RADIUS Dynamic-Request Server
Field Name
Disconnect or CoA No Session ID
Disconnect or CoA Bad
Authenticators
Disconnect or CoA Packets
Dropped
No Secret
Unknown Requests
Invalid Addresses Received
Setting the Baseline for RADIUS Dynamic-Request Server Statistics on page 310
show radius statistics
RADIUS Request Configuration
----------------------------
Udp
IP Address Port Disconnect
---- ----------
1700 disabled
1700 disabled
Field Name
IP address
Field Description
RADIUS-initiated disconnect or CoA messages
rejected because the request did not include a session
ID attribute
RADIUS-initiated disconnect or CoA messages
rejected because the calculated authenticator in the
authenticator field of the request did not match
RADIUS-initiated disconnect or CoA packets dropped
because of queue overflow
Messages rejected because a secret was not present
in the authenticator field
Packets received with an invalid RADIUS code for
RADIUS disconnect or change of authorization
Number of invalid addresses received
Change
Of
Authorization Secret
------------- ------
disabled <NULL>
disabled mysecret
Field Description
IP address of the RADIUS server