Monitoring The Radius Rollover Configuration; Monitoring Radius Server Information - Juniper JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010 Configuration Manual

Table 27: show radius override Output Fields (continued)
Related Topics

Monitoring the RADIUS Rollover Configuration

Display the configuration of the RADIUS rollover-on-reject feature.
Purpose
To display the RADIUS rollover configuration:
Action
host1#show radius rollover-on-reject
rollover-on-reject enabled
RADIUS rollover-on-reject is enabled.
Meaning
Related Topics

Monitoring RADIUS Server Information

Display RADIUS server information.
Purpose
Use with the optional accounting, authentication, dynamic-request,
route-download, or pre-authentication keywords to limit output to the specific type
of server.
To display RADIUS server configuration information:
Action
host1#show radius servers
Field Name Field Description
nas-info Either the NAS-IP-Address [4] and NAS-Identifier [32] attributes of
the virtual router generating the accounting information are used,
or they are overridden with the respective attributes of the
authentication virtual router.
show radius override
show radius rollover-on-reject
RADIUS Authentication Configuration
-----------------------------------
Udp Retry
IP Address Port Count
------------- ---- -----
172.28.30.117 1812 3
172.28.30.118 1812 3
172.28.30.119 1812 3
RADIUS Accounting Configuration
-------------------------------
Udp Retry
IP Address Port Count
Chapter 2: Monitoring and Troubleshooting Remote Access
Maximum Dead
Timeout Sessions Time
------- -------- ----
3 255 30
3 255 30
3 255 30
Maximum Dead
Timeout Sessions Time
Monitoring the RADIUS Rollover Configuration
Secret Status
------ ------
radius dead
radius active
radius alive
Secret Status
145