Monitoring The Radius Server Algorithm; Monitoring Radius Override Settings; Monitoring The Radius Rollover Configuration; Table 27: Show Radius Override Output Fields - Juniper JUNOSE SOFTWARE 11.2.X - BROADBAND ACCESS CONFIGURATION GUIDE 7-20-2010 Configuration Manual

Monitoring the RADIUS Server Algorithm

Purpose
Action
Related Topics

Monitoring RADIUS Override Settings

Purpose
Action
Meaning
Related Topics

Monitoring the RADIUS Rollover Configuration

Purpose
Action
Meaning
Related Topics
Copyright © 2010, Juniper Networks, Inc.
Display information about the currently configured RADIUS server algorithm.
To display the RADIUS server algorithm:
host1#show radius algorithm
direct
show radius algorithm
Display the current RADIUS override settings.
To display the RADIUS override settings:
host1:vrXyz7#show radius override
nas-ip-addr: nas-ip-addr
nas-info: from authentication virtual router
Table 27 on page 139 lists the show radius override command output fields.

Table 27: show radius override Output Fields

Field Name Field Description
nas-ip-addr Either the NAS-IP-Address [4] attribute is used, or it is overridden
with the Tunnel-Client-Endpoint [66] attribute.
nas-info Either the NAS-IP-Address [4] and NAS-Identifier [32] attributes of
the virtual router generating the accounting information are used,
or they are overridden with the respective attributes of the
authentication virtual router.
show radius override
Display the configuration of the RADIUS rollover-on-reject feature.
To display the RADIUS rollover configuration:
host1#show radius rollover-on-reject
rollover-on-reject enabled
RADIUS rollover-on-reject is enabled.
show radius rollover-on-reject
Chapter 2: Monitoring and Troubleshooting Remote Access
139