Monitoring The Packet Mirroring Configuration Of Ip Interfaces; Table 61: Show Ip Interface Output Fields - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - POLICY MANAGEMENT CONFIGURATION GUIDE 2010-10-04 Configuration Manual

Meaning
Related
Documentation

Monitoring the Packet Mirroring Configuration of IP Interfaces

Purpose
Copyright © 2010, Juniper Networks, Inc.
In Policed Packets 0, Bytes 0
In Error Packets 0
In Invalid Source Address Packets 0
In Discarded Packets 0
Out Forwarded Packets 0, Bytes 0
Unicast Packets 0, Bytes 0
Multicast Routed Packets 0, Bytes 0
Out Scheduler Dropped Packets 0, Bytes 0
Out Policed Packets 0, Bytes 0
Out Discarded Packets 0
IP policy secure-input ipSecureIn
classifier-group secClassA entry 1
0 packets, 0 bytes
mirror analyzer-ip-address 10.10.3.14, analyzer-virtual-router default
classifier-group secClassB entry 2
0 packets, 0 bytes
mirror analyzer-ip-address 10.10.3.14, analyzer-virtual-router vr200
IP policy secure-output ipSecureOut
classifier-group secClassC entry 1
0 packets, 0 bytes
mirror analyzer-ip-address 10.10.7.104, analyzer-virtual-router vr300
Table 61 on page 259 lists the secure packet mirroring-related fields.

Table 61: show ip interface Output Fields

Field Name
IP Policy
classifier-group
packets
bytes
mirror analyzer-ip-address
analyzer-virtual-router
show ip interface
Display CLI-based packet mirroring configuration information for a specific interface or
for all interfaces on which mirroring is enabled.
NOTE: This command is deprecated and might be removed completely in a
future release. The function provided by this command has been replaced
by the show secure policy-list command.
Chapter 14: Monitoring Packet Mirroring
Field Description
Type (secure-input, secure-output) and name of the
secure policy
Name of a CLACL attached to the interface and number
of entry
Number of packets classified by the CLACL
Number of bytes classified by the CLACL
IP address of analyzer device
Name of analyzer interface virtual router
259