Understanding Planning Of Firewall Filters - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos
Related
Documentation
3228
®
OS for EX Series Ethernet Switches, Release 10.4
packet and the second term, the switch continues to compare the packet to each
successive term defined in the firewall filter until a match is found. If a packet does not
match any terms in a firewall filter, the default action is to discard the packet.
Understanding Planning of Firewall Filters on page 3229
Understanding Firewall Filter Processing Points for Bridged and Routed Packets on EX
Series Switches on page 3231
Understanding How Firewall Filters Are Evaluated on page 3253
Understanding Firewall Filter Match Conditions on page 3255
Understanding the Use of Policers in Firewall Filters on page 3259
Understanding Filter-Based Forwarding for EX Series Switches on page 3260
Example: Configuring Firewall Filters for Port, VLAN, and Router Traffic on EX Series
Switches on page 3261
Example: Using Filter-Based Forwarding to Route Application Traffic to a Security
Device on EX Series Switches on page 3280
Copyright © 2010, Juniper Networks, Inc.