Types Of Agricultural Implements Coupled With Tractors - Belarus 80.1 Operation Manual

BELARUS-80.1/82.1/820 tractors classify as motor vehicles covered by traffic regula-
tions and other regulatory documents on road vehicles operation.
A tractor operator is personally responsible for observance of traffic regulations and safe-
ty requirements as well as safety measures and proper use of BELARUS-80.1/82.1/820 tractor,
specified in this Operation manual.
Service staff qualification requirements for BELARUS-80.1/82.1/820 tractors:
- only staff who have undergone special training and have been instructed on safety
requirements, who have tractor driving license of due form and have received admission to
operate a specific tractor, are allowed to work with the tractor;
- if a tractor owner (or the person responsible for tractor operation) does not operate
the tractor himself, he shall make sure that before starting tractor operation all persons re-
lated to tractor operation have been duly trained for safety arrangement and precautions
and for correct coupling of implements with the tractor, and have studied the operation
manual for tractor use.
ATTENTION: OWNERS AND OFFICIALS OR OTHER PERSONS RESPONSIBLE
FOR TRACTOR'S TECHNICAL CONDITION AND OPERATION MUST NOT ALLOW THE
TRACTOR FOR ROAD TRAFFIC AND COUPLING WITH IMPLEMENTS, OR ADMIT
OPERATORS FOR TRACTOR DRIVING WITH VIOLATION OF CURRENT TRAFFIC
REGULATIONS AND THIS OPERATION MANUAL!
ATTENTION: BEFORE STARTING TRACTOR MOVEMENT IN STRUCTURE OF
MTU, MAKE SURE THERE ARE NO PEOPLE NEARBY, INCLUDING THE AREA BE-
TWEEN THE TRACTOR AND THE IMPLEMENTS OR TRAILERS (SEMI-TRAILERS)
COUPLED!

5.2 Types of agricultural implements coupled with tractors

According to the type of coupling with BELARUS-80.1/82.1/820 tractors, implements
are divided into the following types:
- mounted: the implement is fixed in three points to the upper and lower links' hinges of
RLL. The tractor carries the full weight of an implement in transport position. Implement struc-
tural components in transport position do not touch the ground. While changing the implement
position from operating to transport mode, the point in which the implement is connected to
the tractor is forcedly displaced to the new point along the vertical axis;
- semi-mounted: the implement is fixed in three points to the upper and lower links'
hinges of LL or just in two points to lower links of RLL only. The weight of an implement in
transport position is partly carried by the tractor and mostly by the machine's traveling
wheels (usually by one or two wheels). While changing the implement position from oper-
ating to transport, the point in which the implement is connected to the tractor is forcedly
displaced to the new point along the vertical axis. Two-point articulated linkage is effected
by way of connection of the machine's suspension axis connection pins to the lower links'
hinges of LL (upper link is not used). It is also possible to use a crossbar from the tractor
kit or the machine's kit.
250
80-0000010B OM