Fuses Of The Instrument Dashboard With Molded Panel - Belarus 80.1 Operation Manual

Table 2.18.1 – Assignment of fuses of the instrument dashboard with cast panel
Number as per Rated cur-
figure 2.18.2
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16

2.18.3 Fuses of the instrument dashboard with molded panel.

In the instrument dashboard with molded panel (installed upon request instead of in-
strument dashboard with cast panel) three blocks of electrical circuits cut-out fuses are built
in. To access cut-out fuses do two bolts 2 out (figure 2.18.3) and open instrument dashboard
cover 1.
Figure 2.18.3 – Arrangement of fuses block in the instrument dashboard with mold-
ed panel
rent
15 А Brake lights, terminal (6) and terminal (8) of trailer socket
15 А Road train lights (if available), rear working lights, cab light
15 А Emergency warning light
25 А Front and rear wipers, windshield washer
15 А Audible beep
Road lights upper beam, indicator lamp of upper beam acti-
25 А
vation
25 А Front working lights, beacon (if installed)
Power to control circuit of heater-fan or power to heater-fan
25 А
80-8101720
Power to consumers, working with starter and instrument
25 А switch in the position "instruments on": instruments, speed
sensors, power to fuse 15 and 16
Power supply of the heater-fan electric motor (with heater-
25 А
fan 80-8101720 installed this fuse is not used);
Parking light of the left side, terminal (7) of trailer socket,
7,5
number plate light
Parking lights of the right side, terminal (5) of trailer socket,
15А
instrument illumination
7,5 А Lower beam of the left road light
7,5А Lower beam of the right road light
Power to gauges, speed sensors, pilot lamp units, audible
7,5 А
warning (buzzer) and parking brake relay
Turn indicator relay, heating plugs block, heating plugs relay
15А
coils
1 – instrument dashboard cover; 2 – screw.
Name of protected circuit
57
80-0000010B OM