Types Of Implements Coupled With Tractor "Belarus-922.6 - Belarus 922.6 Operator's Manual

A tractor operator is personally responsible for observance of traffic regulations and
safety requirements as well as safety measures and correct tractor "BELARUS-922.6" use,
specified in this operation manual.
Service staff qualification requirements for tractor "BELARUS-922.6" operation:
- only qualified service staff trained for safety arrangement and precautions, having
tractor driving license of due form and having admission to operate the specific tractor, is
allowed;
- if a tractor owner (or any person responsible for tractor operation) does not operate
the tractor himself, he shall make sure that before starting tractor operation all persons re-
lated to tractor operation have been duly trained for safety arrangement and precautions
and for correct coupling of implements with the tractor, and have studied the operation
manual for tractor use.
ATTENTION: OWNERS AND OFFICIALS OR OTHER PERSONS RESPONSIBLE
FOR TRACTOR OPERATION AND MAINTENANCE MUST NOT ALLOW THE TRACTOR
FOR ROAD TRAFFIC AND COUPLING WITH IMPLEMENTS, OR ADMIT OPERATORS
FOR TRACTOR DRIVING WITH VIOLATION OF CURRENT TRAFFIC REGULATIONS
AND THE GIVEN OPERATION MANUAL!
ATTENTION: BEFORE STARTING TRACTOR MOVEMENT IN STRUCTURE OF
MTU, MAKE SURE THERE ARE NO PEOPLE NEARBY, INCLUDING THE AREA BE-
TWEEN THE TRACTOR AND THE IMPLEMENTS OR TRAILERS (SEMI-TRAILERS)
COUPLED!
4.2 Types of implements coupled with tractor "BELARUS-922.6»
According to the type of coupling with tractors «BELARUS-922.6» the implements
are divided into the following types:
- mounted implement is fixed in three points to the LL upper and lower links. The trac-
tor can carry the weight of an implement in full. The implement structural elements in
transport position do not touch the ground. While changing the implement position from op-
erating to transport, the point of the implement connection to the tractor is forcedly displaced
up to the new point;
- semi-mounted implement is fixed in three points to the LL upper and lower links or
only in two points to the LL upper and lower links. The tractor can carry the weight of an im-
plement in transport position partly and mostly by its traveling wheels (usually one or two).
While changing the implement position from operating to transport, the point of the imple-
ment connection to the tractor is forcedly displaced up to the new point. Two-point articulat-
ed linkage is carried out by connecting the implement suspension axis link pins to the LL
lower links (upper link is not used). It is also possible to use a cross bar from the tractor or
implement;
- semi-trailed implement is usually fixed in one point by means of a tractor drawbar
ring to the DH. It is also possible to use a two-point connection with lift linkage (upper link is
not used). The tractor can carry the weight of an implement in transport position partly and
mostly by its traveling wheels (usually two). While changing the implement position from op-
erating to transport, the point of the implement connection to the tractor remains un-
changed. Semi-trailed implements include various vehicles for general and special purpos-
es: general purpose semi-trailers, tank semi-trailers, dump trucks and special purpose semi-
trailed vehicles for mechanization of technological process in agriculture;
- trailed implement is usually fixed in one point by means of a tractor drawbar ring to
the DH. It is also possible to use a two-point connection with lift linkage (upper link is not
used). The chassis can carry the weight of an implement in transport position in full, the
93
922.6-0000010 OM