Types Of Implements Coupled With Tractor "Belarus -1523.5 - Belarus 1523.5 Operator's Manual

1523.5-0000010 OM
A tractor operator is personally responsible for observance of traffic regulations and safety
requirements as well as safety measures and correct tractor "BELARUS-1523.5" use,
specified in this operation manual.
Service staff qualification requirements for tractor "BELARUS-1523.5" operation:
- only qualified service staff trained for safety arrangement and precautions, having tractor
driving license of due form and having admission to operate the specific tractor, is allowed;
- if a tractor owner (or any person responsible for tractor operation) does not operate the
tractor himself, he shall make sure that before starting tractor operation all persons related
to tractor operation have been duly trained for safety arrangement and precautions and for
correct coupling of implements with the tractor, and have studied the operation manual for
tractor use.
ATTENTION: OWNERS AND OFFICIALS OR OTHER PERSONS RESPONSIBLE FOR
TRACTOR OPERATION AND MAINTENANCE MUST NOT ALLOW THE TRACTOR FOR
ROAD TRAFFIC AND COUPLING WITH IMPLEMENTS, OR ADMIT OPERATORS FOR
TRACTOR DRIVING WITH VIOLATION OF CURRENT TRAFFIC REGULATIONS AND
THE GIVEN OPERATION MANUAL!
ATTENTION: BEFORE STARTING TRACTOR MOVEMENT IN STRUCTURE OF MTU,
MAKE SURE THERE ARE NO PEOPLE NEARBY, INCLUDING THE AREA BETWEEN
THE TRACTOR AND THE IMPLEMENTS OR TRAILERS (SEMI-TRAILERS) COUPLED!
4.2 Types of implements coupled with tractor "BELARUS -1523.5»
According to the type of coupling with tractors «BELARUS-1523.5» the implements are
divided into the following types:
- mounted implement is fixed in three points to the LL upper and lower links. The tractor
can carry the weight of an implement in full. The implement structural elements in transport
position do not touch the ground. While changing the implement position from operating to
transport, the point of the implement connection to the tractor is forcedly displaced up to
the new point;
- semi-mounted implement is fixed in three points to the LL upper and lower links or only in
two points to the LL upper and lower links. The tractor can carry the weight of an imple-
ment in transport position partly and mostly by its traveling wheels (usually one or two).
While changing the implement position from operating to transport, the point of the imple-
ment connection to the tractor is forcedly displaced up to the new point. Two-point articu-
lated linkage is carried out by connecting the implement suspension axis link pins to the LL
lower links (upper link is not used). It is also possible to use a cross bar from the tractor or
implement kit;
- semi-trailed implement is usually fixed in one point by means of a tractor drawbar ring to
the DH. It is also possible to use a two-point connection with lift linkage (upper link is not
used). The tractor can carry the weight of an implement in transport position partly and
mostly by its traveling wheels (usually two). While changing the implement position from
operating to transport, the point of the implement connection to the tractor remains un-
changed. Semi-trailed implements include various vehicles for general and special pur-
poses: general purpose semi-trailers, tank semi-trailers, dump trucks and special purpose
semi-trailed vehicles for mechanization of technological process in agriculture;
- trailed implement is usually fixed in one point by means of a tractor drawbar ring to the
DH. It is also possible to use a two-point connection with lift linkage (upper link is not
used). The chassis can carry the weight of an implement in transport position in full, the
tractor hitch mechanism (DH or LL) is loaded only with the weight of an implement con-
96