Types Of Implements Coupled With Tractor "Belarus - Belarus 1822.3 Operator's Manual

5.2 Types
1822.3/1822 .3/2022.3/2022 .3"
According
1822.3/1822 .3/2022.3/2022 .3» the implements are divided into the following types:
- mounted implement is fixed in three points to the upper and lower draft arms of LL.
The tractor can carry weight of an implement in full. Implement structural components at
carry is not in touch with ground contact area. While changing the implement position from
operating to transport the point in which the implement is connected to the tractor is forcedly
displaced to the new point along the full vertical extent;
- semimounted implement is fixed in three points to the upper and lower draft arms of
LL or just in two points to the lower draft arms of LL only. The tractor can carry weight of an
implement in part and mostly by its traveling wheels (usually by one or two wheels). While
changing the implement position from operating to transport, the point in which the imple-
ment is connected to the tractor is forcedly displaced to the new point along the full vertical
extent. Two-point articulated linkage is effected by way of connection of suspension axis link pin to
the lower draft arms hinges of LL (upper draft arm is not used). It is also possible to use a cross bar
from the tractor or implement kit.
- semitrailed implement is usually fixed in one point by means of tractor drawbar clevis
to the DH. It is also possible to use a two-point connection with lift linkage (upper draft arm is not
used). The tractor can carry weight of an implement in part and mostly by its traveling wheels
(usually not less than by two). While changing the implement position from operating to trans-
port, position of the point in which the implement is connected to the tractor remains un-
changed. Semitrailed implements include various vehicles for general and special purposes: gen-
eral purpose semitrailers, tank semitrailers and dampers, and special purpose semitrailed vehicles
for mechanizing of technological process in the agricultural sector.
- trailed implement is usually fixed in one point by means of tractor drawbar clevis to
the DH. It is also possible to use a two-point connection with lift linkage (upper draft arm is not
used). The chassis can carry weight of an implement in full, hitch mechanism (DH or LL) is
loaded only by weight of implement connector. While changing the implement position from
operating to transport, position of the point in which the implement is connected to the tractor
remains unchanged. Semitrailed implements include various vehicles for general and special pur-
poses: general purpose semitrailers, tank semitrailers, and dampers, and special purpose semi-
trailed vehicles for mechanizing of technological process in the agricultural sector.
of implements
to the type
https://tractormanualz.com/
coupled with
of coupling with
190
2022.3-0000010 OM
tractor "BELARUS-
tractors «BELARUS-