Belarus 80.1 Operation Manual page 306

6.4.3.11 Operation 32. Maintenance of alternator and starter
Clean alternator and starter from dust and dirt.
Check the tightening of starter-retaining bolts, tighten them if necessary. Strip wire
ends to be connected to starter terminal and tighten their connections.
Check and, if necessary, tighten retaining bolts 2 (Figure 6.4.28) of alternator 3.
Check the condition and tightening force of three terminal connections 1 of the alternator.
If necessary, strip them and tighten them up.
1 – terminal connections; 2 – alternator retaining bolts; 3 – alternator.
Figure 6.4.28 – Maintenance of alternator
306
80-0000010B OM