Belarus 80.1 Operation Manual page 276

Table 6.1.1 – Types of scheduled technical maintenance
Types of technical maintenance
Technical maintenance during operating run-in
Shift-time (STM)
First technical maintenance (TM-1)
Additional technical maintenance (2TM-1)
Second technical maintenance (TM-2)
Third technical maintenance (TM-3)
Special technical maintenance
General technical maintenance
Seasonal technical maintenance (TM-SS и TM-
AW)
Technical maintenance not coinciding with the
set intervals of TM-1, 2TM-1, TM-2, TM-3 and
special TM
Technical maintenance in special operating
conditions
Technical maintenance during storage
___________________________________________________________________________________________________________________________________________________________
1)
Data on the technical maintenance, carried out by the operator before, during and
after the tractor run-in are given in subsection 4.4 "Tractor final assembly and run-in".
2) Data on technical maintenance performed by the operator on long storage of the
tractor are shown in section 8 "Tractor storage" of this Manual.
Deviation of + 10% for TM-1, 2TM-1 and TM-2 and 5% for TM -3 from the set inter-
vals of TM are permitted (advancing or delayed TM) depending on the operating condi-
tions of the tractor.
1)
TM before, during and after run-in
(after 30 hours of operation)
As and when necessary
While transfer to autumn-and-
winter operation (TM-AW) and to
spring-and-summer (TM-SS)
During preparation of the tractor
operation in special conditions
2) In case of long-term storage
276
80-0000010B OM
Intervals, h
8-10
125
250
500
1000
2000
–