Compensation of the front cardan shaft movement when the front drive axle swings is
provided by axial movement of flange 1 in bushing 5.
To prevent wrapping of straw crops on the cardan shafts during harvesting operations
safeguard is provided.
3.10.3.2 Transfer box
3.10.3.2.1 General information
1 - spring; 2 - pin; 3 – GB gear; 4 – roller; 5 – shaft; 6 - bearing;
8 – bearing; 9 – gear; 10 – axis; 11 – intermediate gear; 12 – nut; 13 – toothed coupling;
14 – flange; 15 – roller with lever; 16 – housing
Figure 3.10.9 Transfer box of the front drive axle
150
80-0000010B OM
7 – bushing;