Belarus 80.1 Operation Manual page 288

When tractor is operating coupled with machines that require increased oil extraction,
fill oil up to mark "C" of oil level indicator 1 with retracted rods of hydraulic cylinders of coupled
machine.
1 – oil level indicator; 2 – plug of oil filler opening, 3 – tank.
Figure 6.4.3 – Oil level check in the combined HLL and HSC tank (in HLL tank)
ATTENTION: THE OPERATION OF OIL LEVEL CHECK IN THE COMBINED HLL
AND HSC TANK (IN HLL TANK) SHALL BE CARRIED OUT ONLY WITH RETRACTED
RODS OF HYDRAULIC CYLINDERS OF RLL AND OF THE IMPLEMENTS COUPLED
WITH THE TRACTOR!
6.4.1.5 Operation 4. Check of oil level in HLL tank
Note – The operation shall be performed on tractors with canopy frame or canopy base
on the basis of small cabin.
Before checking oil level, put tractor on a flat horizontal platform. Lift the RLL links to
their top position, stop the engine, brake the tractor with the parking brake and raise the hood
as indicated in subsection 6.2 "Providing access to tractor components for technical mainte-
nance."
Check oil level visually by means of oil dipstick 2 (Figure 6.4.4) on tank 1 on tractor left
side. The level shall be between marks "O" and "П" of the dipstick. If required, remove thread-
ed plug 3 and top up oil to the level of mark "П" through oil filler opening.
When tractor is operating coupled with machines that require increased oil extraction,
fill oil up to mark "C" of oil dipstick 2 with retracted rods of hydraulic cylinders of coupled ma-
chine.
ATTENTION: THE OPERATION OF OIL LEVEL CHECK IN HLL TANK SHALL BE CAR-
RIED OUT ONLY WITH RETRACTED RODS OF HYDRAULIC CYLINDERS OF RLL AND OF
THE IMPLEMENTS COUPLED WITH THE TRACTOR!
1 – tank; 2 – oil dipstick, 3 – plug of oil filler opening.
Figure 6.4.4 – Oil level check in HLL tank
288
80-0000010B OM