Belarus 80.1 Operation Manual page 22

Steering:
- hydrostatic. The feed pump is gear type. The direction of rotation is left. The dos-
ing pump is gerotor-type, with an open center, without steering response. The type of the
rotation mechanism is hydraulic cylinder of bidirectional operation and a steering linkage.
- hydromechanical (optionally on the tractors "BELARUS-80.1/82.1"). The feeding
pump is gear type. The direction of rotation is left. The type of rotation mechanism is
worm, helical sector and power steering;
- hydrostatic with dosing pump on the body of power steering (optionally on tractor
"BELARUS-80.1" with canopy frame or canopy base on the basis of a small cabin). The
feeding pump is of gear-type. The direction of rotation is left. The dosing pump is gerotor-
type, with an open center, without steering response. The type of rotation mechanism is
hydraulic cylinder of bidirectional operation and a steering linkage.
Hydraulic lift linkage:
- remote-cylinder with draft (position) control, which provides draft, position and depth
control of the agricultural implements. The system has three pairs of independent outlets;
- remote-cylinder without draft control, which provides depth control of agricultural
implements. The system has two pairs of independent outlets and one pair doubled.
The rear lift linkage is a three-point linkage of category 2 under ISO 730 and a link-
age 2 under GOST 10677 with external or internal locking of lower link.
Tow hitches :
- hydraulic hook TСУ-2 – for coupling with semi-trailers and semi-trailed agricultural
implements;
- pendulum TСУ-1M – for coupling with semi-trailed and trailed agricultural imple-
ments (optionally);
- combined TСУ-1M-02 (with interchangeable functions TСУ-2 and TСУ-1M) – for
coupling with semi-trailed and trailed agricultural implements; with semi-trailers and semi-
trailed agricultural implements, depending on the hitch element installed (optionally);
- lowering link – for coupling with semi-trailed and trailed agricultural implements
(optionally);
- crossbar TСУ-1Zh – for coupling with trailed and semi-trailed implements (optionally);
- twin crossbar TСУ-1Zh-01 – for coupling with trailed and semi-trailed implements
(optionally).
The cabin is a one-seated with a protective rigid framework, having thermal, noise
and vibration insulation, equipped with a sprung seat adjustable for operator's height and
weight, with rear-view mirrors, with a sun visor, with electrical wipers for front and rear
screens, with front screen washers, with a roof lamp and a place to install a radio set, with
a system of heating and ventilation (upon request – only with ventilation). Upon request
the tractor can be equipped with an additional seat. The cab doors have got locks, there
are keys for the left door. Right door is for emergency exit. The cab complies with category
2 under EN 15695-1:2009.
Upon request instead of a complete universal cabin the following can be mounted
on your tractor:
- canopy frame or canopy base on the basis of a universal cabin (tractors "BELA-
RUS-80.1/82.1/820");
- canopy frame or canopy base on the basis of a small cabin (tractors "BELARUS-
80.1/82.1").
ATTENTION: TRACTORS "BELARUS-80.1/82.1" WITH CANOPY FRAME OR
CANOPY BASE ON THE BASIS OF A SMALL CABIN ARE NOT DESIGNATED FOR
SUPPLY TO THE COUNTRIES OF THE CUSTOMS UNION.
The electrical equipment complies with GOST 3940. The rated power supply voltage
for on-board network is 12V. The rated voltage for the start-up is 12V. Instruments of trac-
tors with a universal cabin (canopy frame or canopy base on the basis of a universal cabin)
is a combination of instruments, electrical tachospeedometer, two blocks of pilot lamps. In-
struments of the tractors with a canopy frame or canopy base on the basis of a small cabin
are separate instruments, mechanical tachospeedometer, pilot and warning lamps.
22
80-0000010B OM