Belarus 80.1 Operation Manual page 156

- 13.6-20 (13.6R20 or 360/70R20) – front tyres, in complete set with rear tyres
16.9R30;
Note – Tyres 11.2R24 and 11.2R42 (9.5-42) are mounted for tractor operation in
spaces between rows of beetroot 450 mm on the track 1800.
When using tyres 15.5R38 and 11.2R42 with loads, exceeding their load capacity,
wheel twinning should be used.
Tyres 9.5-42 shall be used only in twin version.
Contact your dealer for additional advice on twin tyres application.
Parameters of tyres used on tractors "BELARUS-80.1/82.1/820", are given in table
3.11.1.
Table 3.11.1 – Parameters of tyres
Dimension type
7.5-20
11.2-20
360/70R24
360/70R20
9.00R20
13.6-20(13.6R20)
11.2R24
15.5R38
18.4R34(F-11)
18.4R30
16.9R38
16.9R30
9.5-42
11.2R42
18.4/78-30
(18.4L-30)
_________________________________________________________________________________
1)
In this section only rear tyre rolling radii are given, which are necessary for
tachospeedometer speed programming as it is specified in subsection 3.18.3 and
3.18.4 "Programming order of tachospeedometer of dashboard with molded panel".
The rules of tyres operation, selection of optimal tyre inner pressure depending on
the operating conditions and loads on tractor axles, as well as methods of track setting are
given in subsection 4.2. "Tractor use"
Tyre section, mm
205
284
357
357
234
345
284
394
467
467
429
429
241
284
470
156
80-0000010B OM
Tyre rolling radius, mm
—
—
—
—
—
—
—
750
770
734
800
698
730
749
720
1)