2.28.12 Seat and its adjustments on tractors "BELARUS-80.1/82.1" with canopy
frame and canopy base on the bases of a small cabin
ATTENTION: BEFORE STARTING TO OPERATE THE TRACTOR ADJUST THE
SEAT TO REACH THE MOST COMFORTABLE POSITION. CARRY OUT ALL ADJUST-
MENTS WHEN STAYING IN THE SEAT! THE SEAT IS CONSIDERED CORRECTLY
ADJUSTED ACCORDING TO THE MASS IF IT MOVES HALF OF THE STROKE UNDER
THE OPERATOR'S WEIGHT (THE SUSPENSION STROKE IS 125 MM)!
The seat has the following adjustments:
- adjustment according to the operator's weight. It is carried out by means of handle
2 (figure 2.28.17) within the range from 60 to 120 kg. To adjust the seat for a bigger weight
it is required to rotate handle 2 clockwise. To adjust the seat for a smaller weight it is re-
quired to rotate handle 2 anticlockwise.
- longitudinal adjustment. It is carried out by means of handle 1 within the range of
75 mm from the middle position. To move the seat forward-backward it is required to
shift handle 1 to the right, move the seat and then release the handle. The seat will auto-
matically get locked in the required position.
1 – handle for longitudinal adjustment; 2 – handle for adjustment according to the
weight.
Figure 2.20.1 – Seat adjustments on tractors "BELARUS-80.1/82.1" with canopy
frame or canopy base on the basis of a small cabin
88
80-0000010B OM