Fuses Located On The Hll And Hsc (Hll) Oil Tank Body; Electro-Magnetic Relays - Belarus 80.1 Operation Manual

2.18.4 Fuses located on the HLL and the HSC (HLL) oil tank body
Apart from the fuses, located in the instrument dashboard and shown in fig. 2.18.2
and in figure 2.18.4 the on-board circuit of "BELARUS- 80.1/82.1/820" tractors has fuse 3
(figure 2.18.5) of accumulator batteries charging circuit and general power supply of tractor
on-board circuit before start (60A fuse) and two suspended fuses 8 of heating plugs (30A
each fuse). Fuse 3 is located in fuse block 1. The fuse block is mounted on bracket 2, fixed
on the HLL and HSC (HLL – for tractors with HPS) on the left side.
In cover 4 of the fuse block there are two spare fuses 5. To access spare fuses 5,
take off cover 6 from cover 4 of the fuse block.
1 – block of fuses; 2 – bracket; 3 –60А fuse; 4 – cover of the fuse block; 5 – spare
fuses; 6 – cover; 7 – heating plugs (HP) electro-magnetic relay; 8 – HP fuses.
Figure 2.18.5 – Installation of the fuse block on the HLL and HSC (HLL) oil tank
body

2.18.5 Electro-magnetic relays

On tractors "BELARUS-80.1/82.1/820" electro-magnetic relays are located in the in-
strument dashboard and on the HLL and HSC (HLL) oil tank body.
Electro-magnetic relay 7 (figure 2.18.5) of the heating plugs is located on the oil
tank body.
To access electro-magnetic relay in the instrument dashboard on tractors with cast
panel remove handwheel 2 (figure 2.18.6) of the engine water radiator shutter control by
doing screw 3 out. Then do two bolts 1 and 4 out and take off side console 5 of the instru-
ment dashboard.
59
80-0000010B OM