Belarus 80.1 Operation Manual page 240

Table 4.2.8 – Changing front wheel track of tractor with FDA 822-2300020-02/04 in-
stalled
Variants of mounting the
plate and the rim
Tractor track
Disk offset
(tyre 360/70R24)
Х, mm
Short beam Long beam
+140 1415
+90 1515
-18 1735
-68 1835
+56 1585
+6 1685
-102 1900
-152 2000
240
К, mm
Description of mounting
Main position. The inner
surface of the plate mates
with the gear group flange,
1535
and the disk is located
from the outer side of the
wheel support
Ex-works condition.
The rim is displaced relat-
1635 ing to the plate. The inner
surface of the support ma-
tes with the plate.
The rim is turned by 180°.
1855 The plate mates with the
support inner surface.
The rim is turned by 180°.
1955 The plate mates with the
support outer surface.
The plate mates with the
1705
support outer surface.
The plate mates with the
1805
support inner surface.
The rim is turned by 180°.
2020 The plate mates with the
support inner surface.
The rim is turned by 180°.
2120 The plate mates with the
support outer surface.
80-0000010B OM
method