Table of Contents
Advertisement
2.9 Parking brake control
Upper position of handle 1 (figure 2.9.1) – parking brake "On".
Lower position of handle 1 – parking brake "Off".
To disengage the parking brake press button "A" of control lever and let lever 1
down against the stop.
In figure 2.9.1 parking brake control lever is shown in the position "On".
2.10 Engine stop handle, accumulator batteries switch
When handle 26 of red color (figure 2.1.1) is pulled in the direction towards yourself
fuel feed in the engine cylinders stops, and the engine stops working. When you release
handle 21 it returns to initial position by the action of the spring.
When you press button 7 (figure 2.1.2) accumulator batteries turn on. When you
press it again AB turn off.
2.11 Handle for fuel supply manual control, engine cooling system shutter
control
When handle 4 (figure 2.1.2) is moved to the extreme front position, fuel is fed to the max,
when the handle is moved to the extreme rear position – fuel is fed to the min. in accordance with
the minimum idle speed.
When cold engine is started and heated the shutter is raised by hand wheel 2
clockwise rotation (figure 2.1.1). To reduce coolant temperature the shutter is lowered by
pressing the hand wheel along its axis.
2.12 Tractor pedals and rear axle differential lock control
2.12.1 Tractor pedals
2.12.1.1 When you press pedal 27 (figure 2.1.1) the clutch disengages.
2.12.1.2 When you press pedal 23 (figure 2.1.1) the rear left wheel is braked.
2.12.1.3 When you press pedal 21 (figure 2.1.1) the rear right wheel is braked. If the
brake valve is included in the pneumatic drive package, then when pedal 22 is pressed
the
pneumatic
drive
1 – Parking brake control lever
Figure 2.9.1 – Parking brake control lever
brake
valve
of
trailed
machines
37
80-0000010B OM
brakes
is
actuated.
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
