Display Area - Stratasys K6 Series User Manual

3d production system
Table of Contents

Advertisement

Flashing Red
OVEN LIGHT CONTROL BUTTON
The Oven Light Control button within the Dashboard indicates the current state of the oven light (ON/OFF), and
allows for user control of the oven light. The Oven Light Control button can appear as follows:
Table 4-4:
Oven Light Control Button - Button States
Icon State
Dark Blue (no white
highlighted border)
Light Blue (white
highlighted border)

DISPLAY AREA

The buttons/icons and information shown within the Display Area of the touchscreen will vary depending on
which main page of the User Interface is selected.
When powered ON, a representation of the printer's current state is displayed.
After pressing the Build State button within the Dashboard, the Display Area will refresh and text
describing the reason(s) for the current build state will be displayed. (See
After selecting a button from the Navigation Bar, the Display Area will refresh and the main page
corresponding to the selected button will be displayed.
When working with a wizard, the Display Area will refresh as you navigate through each page of the
wizard.
Invalid tip/mismatch with currently loaded material, or tip has exceeded
the odometer limit for the associated material and no further builds can
be started.
See
"Tip Compatibility & Selection" on page 41
compatibility information and
page 128
for instructions on changing tips.
Description
Oven light is OFF.
Selecting the Oven Light Control button in this state will turn the
oven light ON.
Oven light is ON.
Selecting the Oven Light Control button in this state will turn the
oven light OFF.
52
for material and tip
"Changing Tips or Material Type" on
Figure
4-4.)

Advertisement

Table of Contents
loading

This manual is also suitable for:

K7 seriesFortus 380mcFortus 380mc carbon fiberFortus k6 seriesFortus k7 seriesFortus 380mc carbon fiber edition

Table of Contents