Monitored Data - ABB RELION 620 Series Technical Manual

Section 4
Protection functions
Table 102: 50P-3 Group settings
Parameter Values (Range)
Pickup value 1.00...40.00
Pickup value mult 0.8...10.0
Trip delay time 20...200000
Table 103: 50P-3 Non group settings
Parameter Values (Range)
Operation 1=enable
5=disable
Num of pickup phases 1=1 out of 3
2=2 out of 3
3=3 out of 3
Reset delay time 0...60000
4.1.1.10
156
Unit Step
xIn 0.01
0.1
ms 10
Unit Step
ms 1

Monitored data

Table 104: 51P Monitored data
Name Type
PICKUP_DUR FLOAT32
51P Enum
Table 105: 50P-1/2 Monitored data
Name Type
PICKUP_DUR FLOAT32
50P-1_2 Enum
Default Description
4 Pickup value
1.0 Multiplier for scaling the pickup value
20 Trip delay time
Default Description
1=enable Operation Disable / Enable
1=1 out of 3 Number of phases required for trip activation
20 Reset delay time
Values (Range) Unit
0.00...100.00 %
1=Enabled
2=blocked
3=test
4=test/blocked
5=Disabled
Values (Range) Unit
0.00...100.00 %
1=Enabled
2=blocked
3=test
4=test/blocked
5=Disabled
1MAC504801-IB E
Description
Ratio of pickup time / trip time
Status
Description
Ratio of pickup time / trip time
Status
620 series ANSI
Technical Manual