ABB RELION 620 Series Technical Manual page 777

1MAC504801-IB E
9.5.6
9.5.7
Table 558: 62EST Group settings
Parameter Values (Range)
Motor standstill A 0.05...0.20
Table 559: 62EST Non group settings
Parameter Values (Range)
Operation 1=enable
5=disable
9.5.8
620 series ANSI
Technical Manual
Signals
Table 556: 62EST Input signals
Name Type
I_A SIGNAL
I_B SIGNAL
I_C SIGNAL
BLOCK BOOLEAN
ST_EMERG_RQ BOOLEAN
Table 557: 62EST Output signals
Name Type
ST_EMERG_ENA BOOLEAN
Settings
Unit Step
xIn 0.01
Unit Step
Monitored data
Table 560: 62EST Monitored data
Name Type
T_ST_EMERG Timestamp
62EST Enum
Default Description
0 Phase A current
0 Phase B current
0 Phase C current
0=False Block signal for activating the blocking mode
0=False Emergency start input
Description
Emergency start
Default Description
0.12 Current limit to check for motor standstill
condition
Default Description
1=enable Operation Disable / Enable
Values (Range) Unit
1=Enabled
2=blocked
3=test
4=test/blocked
5=Disabled
Section 9
Control functions
Description
Emergency start activation
timestamp
Status
771