1MRS756881 C
Section 2
2.1
2.2
RET615
Point List Manual
DNP3 data mappings
Overview
This document describes the DNP3 data points and structures available in RET615
Ver.4.0. The data points are unmapped as a default on the DNP3 level.The point
lists describe a superset of all data available through the standard configurations A,
B, C, D, E, F, G, and H including the optional functionalities. The names of the
standard configurations are TE01, TE02, TE03, TE04, TE05, TE06, TE07 and
TE08 respectively.
The point tables show all the available DNP3 data points in the IEDs. The data
objects in the point tables are listed based on the AFL function block and data
object IEC61850 names.
As a default, the class assignments are Class 0 and Class 1 for binary inputs and
Class 0 and Class 2 for analog inputs. These assignments can be modified later.
Analog values are provided with default scalings. The scalings can be freely
modified by the user.
This list represents the superset of DNP3 points. The actual set of available points,
meaning the actual set of available applications, is determined by the IED's ordercode.
Supported functions
Table 2:
Supported functions in RET615
IEC 61850
PHLPTOC1 (HV)
PHLPTOC2 (LV)
PHHPTOC1 (HV)
PHHPTOC2 (LV)
PHIPTOC1 (HV)
PHIPTOC2 (LV)
EFLPTOC1 (HV)
EFLPTOC2 (LV)
EFHPTOC1 (HV)
EFHPTOC2 (LV)
NSPTOC1 (HV)
NSPTOC2 (LV)
Table continues on next page
TE01
TE02
TE03
TE04
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Section 2
DNP3 data mappings
TE05
TE06
TE07
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
TE08
●
●
●
●
●
●
●
●
●
●
11