Operation When Moving The Machine - Canon imagePRESS 1135 Series Service Manual

Operation when moving the machine

If moving the machine to other location after the machine is installed, make sure to go
through the following operations.
1) Turn OFF the main power in accordance with the shutdown sequence.
2) Disconnect the power plug (for outlet).
• Fixing assembly
• Host machine
3) Remove the developing assembly.
4) Pack ITB Stopper Shaft separately.
5) After removing the developing assembly, cover the toner supply mouth with the elastic
tape.
6) Install the deck package material.
7) Open the front left cover and the front right cover of host machine and then, fix the fixing
feed unit with the removed 4 screws.
8) Release the ITB pressure lever.
9) Pack the process unit cover separately and move it.
10) Lift the adjustor.
11) Since package size is 1532 x 970 x 1676, allocate the enough space.
9
Installation > Operation when moving the machine
9 Installation > Operation when moving the machine
9-62
9-62