Turning Off Host Machine; Installation Procedure - Canon imagePRESS 1135 Series Service Manual

Turning OFF Host Machine

Refer to CAUTION : Points to note when turning OFF the main power switch in installation of the host machine.

Installation Procedure

CAUTION :
After the Card Reader-C1 installation,
input the card number that will be
used in the service mode of this
equipment.
• COPIER > FUNCTION > INSTALL
> CARD
If the number is not inputted, even
if the card is inserted, it will not be
recognized.
2) Remove the card reader-installed plate.
• 1 screw (the removed screw will be used on the step 4).)
x1
9
Installation > Card Reader-C1 > Installation Procedure
1) Remove the short connector of the card reader. (The removed short connector will not be used.)
x1
F-9-127
9 Installation > Card Reader-C1 > Installation Procedure
F-9-126
3) Remove the ground wire and cable.
• 1 screw
• 1 toothed washer
(The removed screw and the toothed washer will not be used anymore.)
x1
9-65
F-9-128
9-65