How To Make Color More Vivid When Copying/Printing Stored Files; Points To Note When Replacing Main Controller Pcb 1 - Canon imagePRESS C800 Series Troubleshooting Manual

Chapter 1

1.1.7.1.35 How to make color more vivid when copying/printing stored files

[ Manual-related ]
Description
Please explain how to make color more vivid when copying/printing stored files.
Field Remedy
1) Select Settings/Registration > Adjustment/Maintenance > Adjust Image Quality > "Full Color Printing Vividness Settings".
2) Select "Level 1" or "Level 2" > press "OK".
- "Level 2" uses color more vivid than "Level 1".
- Press "Standard" to reproduce the colors of the original.
[Reference]
- This setting change is enabled only after turning OFF and then ON the main power switch.
- You can set a default value for all jobs, rather than setting the color for Each job separately.
- This mode is enabled if you select "Full Color" in "Select Color" for the Copy or Access Stored Files function, or if the machine detects that the original is in full
color when "Auto (Color/B&W)" is selected.

1.1.7.1.36 Points to note when replacing Main Controller PCB 1

[ Manual-related ]
Description
When replacing the Main Controller PCB 1, perform the following remedy.
Field Remedy
1) Before Replacing
Export settings.
Remote UI > Settings/Registration > Management Settings > Data Management > Import/Export Individually
Target data:
- Address List
- Device Settings (Forwarding Settings, Address Book, Send Function Favorite Settings)
2) Points to note when replacing
Transfer following parts from the old PCB to new PCB.
- Flash PCB
- TPM PCB
1-118
0031-5639
0031-6138