Points To Note When Working On The Surroundings Of The Halogen Heater Of Fixing Assembly - Canon imagePRESS C10000VPSeries Troubleshooting Manual

Points to note when working on the surroundings of the halogen
heater of fixing assembly
[Detail]
One side of the halogen heater of fixing assembly is secured with the sheet metal and the other side has a leaf spring structure.
If the halogen heater is pushed from the fixing sheet metal side, the insulator on the end comes off from the securing section,
and the cables of the halogen heater may come in contact with the sheet metal etc. Photo [A] shows the insulator that is properly
secured and Photo [B] shows the insulator that is coming off.
If the operation continues with the insulator detached, the cables may be damaged, resulting in short-circuit.
Therefore, check that the insulator [1] of the halogen heater is secured in the correct position when visiting the user, replacing
the halogen heater or when attaching/detaching the unit having the halogen heater.
[Reference] The voltage of the fixing assembly can be identified by the colors of the one cable side of the fixing external heat belt
halogen heater.
Model
imagePRESS C10000VP series
imagePRESS C7010 series
imagePRESS 1135 series
[Remedy/Answer]
When visiting the user for periodical maintenance etc., check once that the insulator of the halogen heater is correctly secured.
The following serial numbers requires this check when visiting the user.
Model
imagePRESS C10000VP series
imagePRESS C7010 series
imagePRESS 1135 series
Voltage
200/208
400
200/208
240
200/208
230
US/J
WBE15128 or earlier
115
Color of cable
White
Black
White
Black
Red
Blue
Serial number
EU O
WBF15138 or earlier
All the products
All the products
CN
WBG15004 or earlier