Points To Note When Using Service Mode; Service Mode Menu - Canon imageRUNNER ADVANCE C2030 Service Manual

Overview
Instructions on how to use service mode items can be found within the service mode itself.
The information explains what items have been added or changed from previous models.

Points to note when using Service Mode

• When setting or executing in Service Mode, do not open or close the cover and turn off the
power while "active" is displayed. This may cause Service Mode to set incorrectly or fail to
execute.
• In service mode, it may list "Do not use this at the normal service." in "Points to Note when
Using". The followings indicate when this item should be used.
• The case when a setting value needs to be input on clearing RAM when replacing the
PCB (Clearly indicated in the use case)
• The case when instructed by the service office (due to reasons as having the large
negative effects, difficult settings, etc.)
• The case of performing the individual measure (due to the tender business, etc.)
Do not use in cases that are not mentioned above.
8
Service Mode > Overview > Service Mode Menu
8 Service Mode > Overview > Service Mode Menu

Service Mode Menu

TOP Screen
"MODELIST"
"MODELIST CLASSIC"
If " MODELIST " or " MODELIST CLASSIC " is pressed, the screen will switch to initial screen for
each mode.
F-8-1
A brand new additional mode in the host machine.
A function that can be used as a reference on
how to use each item in Service Mode is installed.
The new function, which will be described later, is
available in MODELIST Mode.
This mode is same as the old machine. The new
function, which will be described later, is not
available in the MODELIST CLASSIC Mode.
8-2
8-2