Renault Laguna III Manual page 478

TOP AND FRONT OF ENGINE
Timing chain: Removal - Refitting
V4Y, and 713
- the power-assisted steering pump (see Power-as-
sisted steering pump: Removal - Refitting)
(36B, Power-assisted steering).
a Remove:
- the right-hand suspended engine mounting support
bolts (1) ,
- the right-hand suspended engine mounting sup-
port,
- the inlet manifold (see 12A, Fuel mixture, Inlet
distributor: Removal - Refitting, page 12A-75) ,
- the ignition coils (see 17A, Ignition, Coils: Re-
moval - Refitting, page 17A-1) ,
- the rocker covers (see 11A, Top and front of en-
gine, Rocker cover: Removal - Refitting, page
11A-139) ,
- the camshaft position sensors (see Camshaft po-
sition sensor: Removal - Refitting) ,
- the alternator (see 16A, Starting - Charging, Al-
ternator: Removal - Refitting, page 16A-1) .
a Fit the flywheel locking tool (Mot. 919-02).
a Remove:
133868
- the crankshaft accessories pulley (see 11A, Top
and front of engine, Crankshaft accessories
pulley: Removal - Refitting, page 11A-33) ,
- the sump (see 10A, Engine and cylinder block
assembly, Lower cover: Removal - Refitting,
page 10A-180) ,
- the oil level sensor (see 10A, Engine and cylinder
block assembly, Oil level sensor: Removal - Re-
fitting, page 10A-237) ,
- the crankshaft seal on the timing side (see 10A,
Engine and cylinder block assembly, Crank-
shaft seal on timing end: Removal - Refitting,
page 10A-134) .
11A-100
11A
133842