Renault Laguna III Manual page 260

ENGINE AND CYLINDER BLOCK ASSEMBLY
Lower cover: Removal - Refitting
M4R
a Check that the sump is not:
- scratched,
- deformed.
If this is the case, replace the sump.
a Check that the base plate is not scratched.
a Apply a bead of SILICONE ADHESIVE SEALANT
(see Vehicle: Parts and consumables for the re-
pair) (MR 415, 04B, Consumables - Products) with a
diameter of approximately 5 mm at a distance of ap-
proximately 8 mm from the inner edge of the sump
to ensure correct sealing.
II - REFITTING OPERATION FOR PART
CONCERNED
a Fit the lower cover.
a Manually tighten the sump bolts until they make con-
tact.
a Tighten to torque and in order the sump bolts (10
Nm).
116046
III - FINAL OPERATION.
a Top up the engine oil (see 10A, Engine and cylin-
der block assembly, Engine oil: Draining - Refill-
ing, page 10A-100) .
a Refit:
- the engine undertray,
- the engine undertray bolts.
a Tighten the engine undertray bolts.
10A-183
10A
115241