Renault Laguna III Manual page 597

TOP AND FRONT OF ENGINE
Cylinder head: Removal - Refitting
V4Y, and 713
a Fit the engine wiring.
a Clip:
- the engine wiring,
- the engine wiring connector (15) .
a Refit the engine wiring bolts (16) .
a Connect:
- the connector (17) from the oil pressure sensor,
- the connectors (18) from the injectors.
a Refit:
- the rocker covers (see 11A, Top and front of en-
gine, Rocker cover: Removal - Refitting, page
11A-139) .
- the camshaft position sensors (see Camshaft po-
sition sensor: Removal - Refitting) ,
- the ignition coils (see 17A, Ignition, Coils: Re-
moval - Refitting, page 17A-1) ,
- the intake distributor (see 12A, Fuel mixture, Inlet
distributor: Removal - Refitting, page 12A-75) .
133843
a Refit:
- the oil-water exchanger pipe,
- the clips (19) of the oil-water exchanger pipe using
the tool (Mot. 1448),
- the power-assisted steering pump (see Power-as-
sisted steering pump: Removal - Refitting)
133844
(36B, Power-assisted steering),
- the accessories belts (see 11A, Top and front of
engine, Accessories belt: Removal - Refitting,
page 11A-13) .
a Top up the engine oil (see 10A, Engine and cylin-
der block assembly, Engine oil: Draining - Refill-
ing, page 10A-100) .
a Remove the engine from component support (see
Engine support equipment: Use) .
a Couple the gearbox to the engine (see Automatic
gearbox: Removal - Refitting) (23A, Automatic
transmission).
11A-219
11A
133867