Renault Laguna III Manual page 759

Throttle valve: Removal - Refitting
V4Y
a In order, torque tighten the throttle valve bolts (8
N.m).
a Connect the throttle valve connector.
III - FINAL OPERATION
a Fit the air filter unit air outlet pipe on the throttle
valve.
a Torque tighten the air pipe clip on the throttle
valve (6 N.m).
a Clip the brake servo non-return valve pipe on the air
filter unit air outlet pipe.
a Connect the brake servo non-return valve to the in-
take distributor.
a Refit the engine cover.
a Apply the after repair procedure using the Diagnos-
tic tool :
- connect the Diagnostic tool,
- select « Injection computer » ,
- go to repair mode,
- display the « before/after repair procedure » for the
computer selected,
- select the « Throttle valve » in the « List of compo-
nents controlled by this computer section » ,
- carry out the operations described in the « After re-
pair procedure » section.
FUEL MIXTURE
133472
12A-58
12A