Renault Laguna III Manual page 402

TOP AND FRONT OF ENGINE
Accessories belt: Removal - Refitting
K4M
Tightening torquesm
tensioning roller bolts
fixed roller bolt
WARNING
Do not run the engine without the accessories belt
to avoid damaging the crankshaft accessories pul-
ley.
IMPORTANT
Wear protective gloves during the operation.
REMOVAL
I - REMOVAL PREPARATION OPERATION
a Position the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (02A, Lifting equipment).
a Remove:
- the front right-hand wheel (see Wheel: Removal -
Refitting) (35A, Wheels and tyres),
- the front right-hand wheel arch liner (see Front
wheel arch liner: Removal - Refitting) (55A, Ex-
terior protection).
- the engine undertray bolts,
- the engine undertray.
II - OPERATION FOR REMOVAL OF PART
CONCERNED
25 N.m
25 N.m
a Turn the accessories belt tensioning roller clockwise
using a 13 mm spanner (1) .
a Lock the tensioning roller using a 6 mm Allen key (2)
.
a Remove the accessories belt.
11A-24
11A
14494-4