Engine Oil: Draining - Refilling - Renault Laguna III Manual

ENGINE AND CYLINDER BLOCK ASSEMBLY

Engine oil: Draining - Refilling

M9R
Equipment required
oil recovery tray
oil change wrench
oil change end piece with an 8 mm square drive
Tightening torquesm
drain plug (with a rolled
copper seal)
drain plug (with a flat
copper seal)
Engine Suffix
742
744
746
748
754
802
808
M9R
806
816
800
805
809
849
845
44 N.m
50 N.m
Average oil capacity
(check and adjust with
dipstick) (l)
Draining Oil change
plus oil fil-
ter replace-
ment
6.2 6.6
7 7.4
IMPORTANT
Wear leaktight gloves (Nitrile type) for this opera-
tion.
I - PARTS AND CONSUMABLES FOR THE REPAIR
WORK
a parts always to be replaced: Drain plug seal on
engine oil sump (10,03,01,04)
II - DRAINING
a Remove the "filler cap - dipstick" assembly (1) .
a Position the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (02A, Lifting equipment).
a Remove the engine undertray.
10A-100
10A
122398