Renault Laguna III Manual page 410

TOP AND FRONT OF ENGINE
Accessories belt: Removal - Refitting
V9X
II - REFITTING OPERATION FOR PART
CONCERNED
a Refit new fixed rollers.
a Torque tighten the fixed roller bolts (50 Nm).
a Refit:
- the guards for the fixed rollers,
- a new tensioning roller.
a Torque tighten the tensioning roller bolt (62 N.m).
a Refit a new accessories belt.
a Turn the tensioning roller slightly in a clockwise di-
rection.
a Remove the tensioning roller locking pin.
a Turn the crankshaft twice.
a Check that the accessories belt V-grooves are cor-
rectly fitted in the accessories pulley V-grooves.
III - FINAL OPERATION
a Fit the power-assisted steering pipe.
a Refit:
- the power-assisted steering pipe nut,
- the power-assisted steering pipe bolt.
a Refit:
- the rigid cooling pipe,
- the right-hand suspended engine mounting (see
19D, Engine mounting, Right-hand suspended
engine mounting: Removal - Refitting, page
19D-51) ,
- the lower engine tie-bars (see 1 9 D, Engine
mounting, Lower engine tie-bar: Removal - Re-
fitting, page 19D-85) ,
- the engine undertray,
- the front right-hand wheel arch liner (see Front
wheel arch liner: Removal - Refitting) (55A, Ex-
terior protection),
- the front right-hand wheel (see Wheel: Removal -
Refitting) (35A, Wheels and tyres).
a Connect the battery (see Battery: Removal - Refit-
ting) (80A, Battery).
11A-32
11A