Renault Laguna III Manual page 890

Turbocharger oil pipe: Removal - Refitting
V9X
a Remove the turbocharger heat shield.
WARNING
T o prevent the surrounding components from
overheating, do not damage (tear, pierce, bend,
etc.) a heat shield.
Any damaged heat shields must be replaced.
a Remove the nuts (11) from the connecting hose on
the catalytic pre-converter.
Note:
Apply SUPER RELEASING AGENT (see Vehi-
cle: Parts and consumables for the repair)
(04B, Consumables - Products) to the studs of
the catalytic pre-converter and turbocharger to
prevent the studs from breaking when the nuts
are undone.
a Remove the connecting hose from the catalytic pre-
converter.
a Remove the catalytic pre-converter seal.
TURBOCHARGING
133904
12B-50
a Remove the catalytic pre-converter nuts (12) from
the turbocharger.
a Move aside the catalytic pre-converter.
a Remove the seal between the catalytic pre-convert-
er and the turbocharger.
a Rotate the clip (13) on the intercooler air inlet pipe.
a Disconnect the intercooler air inlet pipe.
a Remove the intercooler inlet air pipe.
a Unclip the turbocharger control solenoid valve.
12B
138352
134228