Renault Laguna III Manual page 23

VEHICLE BODYWORK SPECIFICATIONS
Vehicle panel gaps: Adjustment value
WARNING
The clearance values are given for information pur-
poses.
When adjusting clearances, certain rules have to be
followed:
- maintain symmetry with respect to the opposite
side,
- ensure the flush fitting is correct,
- check correct operation of the opening, and water/
air-tightness.
All values are given in millimetres.
Section 35
(X35) = 1.5 mm ± ± ± ± 1
Section 36
(X36) = 4 mm ± ± ± ± 1.5
Section 37
133291
(X37) = 0.5 mm ± ± ± ± 0.5
01C-15
01C
133294
133296